China CJX2s AC Contactor Manufacture and Factory

Product Overview
Product Details
Data Download
Related Products

CJX2s AC Contactor

Picture

Video

CJX2s AC Contactor

Product Overview
CJX2s series AC Contactor with novel appearance and compact structure is suitablefor using starting &controlling the AC motor frequently,switching on and off thecircuitat a long distance.It is used in combinationwith thermal relay to compose amagneticmotor starter
StandardIEC60947-1,IEC 60947-4-1.

Product Details

Product Overview

CJX2s series AC Contactor with novel appearance and compact structure is suitable for using starting & controlling the AC motor frequently, switching on and off the circuit at a long distance. It is used in combination with thermal relay to compose a magnetic motor starter.
Standard: IEC 60947-1, IEC 60947-4-1.

Specifications

Rated operation current(Ie): 9-95A;
Rated operation voltage(Ue): 220V~690V;
Rated insulation voltage: 690V； Poles: 3P;
Installation: Din rail and screw installation.

Operating and Installation Conditions

Type	Operating and Installation Conditions
Installation category	III
Pollution level	3
Protection degree	CJX2s-09~38: IP20; CJX2s-40~95: IP10
Ambient temperature	limit of temperature: -35℃~+70℃,normal temperature: -5℃~+40℃,The average no more than +35℃ within 24 hours.
Altitude	≤2000m
Ambient temperature	The maximum temperature is 70 degrees, the relative humidity of the air does not exceed 50%, and the temperature below 50% can allow higher relative humidity. If the temperature is 20℃, the air relative humidity could up to 90%, Special measures should betaken for occasional condensation due to humidity changes.
Installation position	Inclination between installation surface and vertical surface should not exceed ±5°
Shock vibration	Products should be installed and used without significant shake, shock and vibration.

Overall and Mounting

CJX2s-09~38

CJX2s-40~95

F4-D, LA2-D, LA3-D Contact Block

LX1-D Coil

Derived Products When The Contactor is Assembled With Following Accessory Module

F4-D, LA2-D, LA3-D Contact Block

LX1-D Coil

Derived Products When The Contactor is Assembled With Following Accessory Module

Specifications

Appearance
Type				CJX2s-09	CJX2s-12	CJX2s-18	CJX2s-25	CJX2s-32	CJX2s-38	CJX2s-40	CJX2s-50	CJX2s-65	CJX2s-80	CJX2s-95
Main circuit characteristic
Poles				3P
Rated insulation voltage(Ui)			V	690
Rated operating voltage(Ue)			V	380/400, 660/690
Rated thermal current(Ith) ，AC-1				20	20	32	40	50	50	50	60	80	125	125
Rated operation current(Ie)	AC-3,380/400V		A	9	12	18	25	32	38	40	50	65	80	95
	AC-3,660/690V		A	6.6	8.9	12	18	22	22	34	39	42	49	49
	AC-4,380/400V		A	3.5	5	7.7	8.5	12	14	18.5	24	28	37	44
	AC-4,660/690V		A	1.5	2	3.8	4.4	7.5	8.9	9	12	14	17.3	21.3
Rated operational power(Pe)	AC-3,380/400V		kW	4	5.5	7.5	11	15	18.5	18.5	22	30	37	45
	AC-3,660/690V		kW	5.5	7.5	10	15	18.5	18.5	30	33	37	45	45
	AC-4,380/400V		kW	1.5	2.2	3.3	4	5.4	5.5	7.5	11	15	18.5	22
	AC-4,660/690V		kW	1.1	1.5	3	3.7	5.5	6	7.5	10	11	15	18.5
Mechanical life			10000 times	1200			1000			900			650
Electrical life	AC-3			110				90					65
	AC-4			22				22		17			11
Frequency of operation	AC-3		times/ hour	1200				600
	AC-4			300				300
Connecting capability of main circuit terminal
Flexible wire	1 wire mm²			1…4			1.5…6			2.5…25			4…50
No terminal	2 wire		mm²	1…4			1.5…6			2.5…16			4…25
Flexible wire	1 wire		mm²	1…4			1…6			2.5…25			4…50
With terminals	2 wire		mm²	1…2.5			1…4			2.5…10			4…16
Hard wire	1 wire		mm²	1…4			1.5…6	1.5…10		2.5…25			4…50
No terminal	2 wire		mm²	1…4			1.5…			2.5…10			4…25
Fastening torque			N·m	1.2			1.8			5			9
Coil
Rated control voltage(Us)		50Hz	V	24、36、48、110、127、220/230、240、380/400、415、440
		50/60Hz	V	24、36、48、110、127、220/230、240、380/400、415、440
Allowed control circuit voltage(Us)		Operation	V	Installation inclination angle ±22.5°: 85%~110%Us； Installation inclination angle±5°: 70%~120%
		Release	V	Installation inclination angle ±22.5°: 20%~75%Us；Installation inclination angle±5°: 20%~65%
Power consumption of coil		Actuation	VA	60			70			200			200
		Keep	VA	6-9.5			6-9.5			15-20			15-20
		Consumption	W	1-3			1-3			6-10			6-10
Auxiliary contacts
Auxiliary contacts specification			A	11
Rated thermal current (Ith)			A	10
Rated operating voltage (Ue)		AC	V	380
		DC	V	220
Rated control capacity		AC-15	VA	360
		DC-13	W	33
Certification CE, TUV, CB

Type	Amax	Bmax	Cmax	a	b	c	d	e	f
CJX2s-09, 12, 18	74.5	45.5	85.5	35	50/60	-	-	-	-
CJX2s-25, 32, 38	83	56.5	97	40	50/70	-	-	-	-
CJX2s-40, 50, 65	127.5	74.5	117	-	-	105	40	100/110	59
CJX2s-80, 95	127.5	85.5	125.5	-	-	105	40	100/110	67

CJX2s AC Contactor

Product Details

Product Overview

Specifications

Operating and Installation Conditions

Overall and Mounting

Specifications

Data Download

Related Products