Contactor Manufacturers | China Contactor Factory & Suppliers - Part 2

Product Category

CJX2-Z DC Contactors

Application

CJX2-Z series DC operated contactor is suitable for use in the circuits up to rated voltage 660V DC 50Hz or 60Hz, and in rated current 9-95A in DC-3/380V load

circuits. For remote controlling circuit making, breaking and frequent starting DC motors. It can also combine with the auxiliary contact group, air delayer, thermal relay devices etc.
CJX2-F-N Mechanical Interlocking Contactor

CJX2-F-N Mechanical Interlocking Contactor
CJ19 Changeover Capacitor AC Contactor

General
019 seiesAC Contactoris suitable forusing inthe dicuitsthe rated woltage up to400V AC 50Hz or 60HLCJ19 is usedto combine with low woltage reactive powercompensators or autoff low woltageshuntcapadtor CJ19 series ACContactorhasrestraining dewiceto effectihely decrease impact caused byinnush transient ourrentwhenswitch onor overvoltagewhen switchoft
CJ19s Contactor for Capacitor Switching

Cj19i contactor for capacitor switching (hereinafter called contactor)is suitable for the circuit of AC 50Hz/60Hz with rated voltage upto690V.It is mainly used to add low voltage reactive power compensation equipment or cut off low voltage parallel capacitor.

The contactor is equipped with a device to suppress the inrush current, which can effectively reduce the impact of the making inrush current on the capacitor and suppress the over-voltage when the capacitor is cut off. Standard:IEC/EN 60947-4-1.
CJ19i(CJ19s) Contactor

General
CJ19i contactor for capacitor switching (hereinafter called contactor)is suitable forthe circuitofAC 50Hz/60Hz with rated rated voltage up to 690V.It is mainly used toadd low voltage reactive power compensation equipment or cut off low voltageparalel capacitor.The contactor is equipped with a device to suppress the inrushcurrent,which can effectively reduce the impact ofthe making inrush current on thecapacitor andsuppress the over-voltage when thecapacitor is cut off.Standard:IEC/EN 60947-4-1.
CJ40 AC Contactor

General

Cj40 series AC contactor is mainly used for remote making & breaking circuits in power lines with AC 50Hz (or 60Hz), rated working voltage up to 690V (or 1140V),rated working current up to 1250A, and protect circuit from overload when assembling with thermal over-load relay or electronic protection device.

Standard: IEC 60947-4-1