Projects
Solutions
Services
News
About Us
YCP5 Motor Starter
-
Product Overview
-
Product Details
-
Data Download
-
Related Products
YCP5 Motor Starter
General
YCP5 series AC Motor Starter is suitable for circuits the alternating voltage up to690V,current up to 80A.The product works to control theoverload,phase loss,shortcircuit protection and infrequent starts of a three-phase squirel cage asynchronousmotor.The Motor Starter can protect the distributing line for infrequent loadtransfer,and it can also works as an isolator
Contact Us
Product Details
Operation and installation condition
1. Installation altitude≤2000m
2. Ambient air temperature -5℃ ~+40℃ average temperature of 24 hours must below +35℃
3. Relative humidity below 90% when the temperature is +25℃±5℃
4. Ambient pollution level: 3
5. Installation category of the starter: III
Acting characteristic of each phase in distribution circuit breaker in the load balanced condition
| No. | Multiple of setting current |
Acting time | Initial state | Ambient air temperature | |
| 1 | 1.0In | ≤2h non-tripping | Cold state | +40℃±2℃ | |
| 2 | 1.2In | ≤2h tripping | Start after 1 | +40℃±2℃ | |
| Type | Standard power ratings of 3-phase molors 50/60Hz in category AC-3 |
Current setting range |
|||||
| 220V | 380V | 415V | 440V | 500V | 660V | ||
| kW | kW | kW | kW | kW | kW | ||
| YCP5-25-ME01 | - | - | - | - | - | - | 0.1-0.16 |
| YCP5-25-ME02 | - | - | - | - | - | - | 0.16-0.25 |
| YCP5-25-ME03 | - | - | - | - | - | - | 0.25-0.4 |
| YCP5-25-ME04 | - | - | - | - | - | 0.37 | 0.4-0.63 |
| YCP5-25-ME05 | - | - | - | 0.37 | 0.37 | 0.55 | 0.63-1 |
| YCP5-25-ME06 | - | 0.37 | - | 0.55 | 0.75 | 1.1 | 1-1.6 |
| YCP5-25-ME07 | 0.37 | 0.75 | 0.75 | 1.1 | 1.1 | 1.5 | 1.6-2.5 |
| YCP5-25-ME08 | 0.75 | 1.5 | 1.5 | 1.5 | 2.2 | 3 | 2.5-4 |
| YCP5-25-ME10 | 1.1 | 2.2 | 2.2 | 3 | 3.7 | 4 | 4-6.3 |
| YCP5-25-ME14 | 2.2 | 4 | 4 | 4 | 5.5 | 7.5 | 6-10 |
| YCP5-25-ME16 | 3 | 5.5 | 5.5 | 7.5 | 7.5 | 9 | 9-14 |
| YCP5-25-ME20 | 4 | 7.5 | 9 | 9 | 9 | 11 | 13-18 |
| YCP5-25-ME21 | 5.5 | 11 | 11 | 11 | 11 | 15 | 17-23 |
| YCP5-25-ME22 | 5.5 | 11 | 11 | 11 | 15 | 18.5 | 20-25 |
| YCP5-25-ME32 | 7.5 | 15 | 15 | 15 | 18.5 | 26 | 24-32 |
| YCP5-80-ME10 | 1.1 | 2.2 | 2.2 | 3 | 3.7 | 4 | 6-10 |
| YCP5-80-ME16 | 2.2 | 4 | 4 | 4 | 5.5 | 7.5 | 10-16 |
| YCP5-80-ME20 | 4 | 7.5 | 7.5 | 7.5 | 10 | 11 | 14-20 |
| YCP5-80-ME25 | 5.5 | 11 | 11 | 11 | 15 | 18.5 | 16-25 |
| YCP5-80-ME40 | 11 | 18.5 | 22 | 22 | 25 | 33 | 25-40 |
| YCP5-80-ME63 | 15 | 30 | 33 | 33 | 40 | 55 | 40-63 |
| YCP5-80-ME80 | 22 | 40 | 45 | 45 | 55 | 63 | 56-80 |
YCP5-25 Accessories
| Names of accessories | Code | Ae11 | installation place | |||||||||||
| Instantaneous auxiliary contacts |
AE11 | 1NO+NC | The front of breaker (1PCS can be installed) |
|||||||||||
| AE20 | 2NO | |||||||||||||
| AN11 | 1NO+1NC | The left of breaker (2PCS can be installed) |
||||||||||||
| AN20 | 2NO | |||||||||||||
| Fault signal contact + Instantaneous auxiliary contacts |
AD1010 | Fault signal contact NO | NO | |||||||||||
| AD1001 | NC | |||||||||||||
| AD0110 | Fault signal contact NC | NO | ||||||||||||
| AD0101 | NC | |||||||||||||
YCP5-25 Release
| Names of accessories | Code | Voltage | installation place | |||||||||||
| Under voltage release | AU115 | 100-127V 50Hz | The right of breaker (1 PCS can be installed) |
|||||||||||
| AU225 | 220-240V 50Hz | |||||||||||||
| AU385 | 380-415V 50Hz | |||||||||||||
| Shunt release | AS115 | 100-127V 50Hz | ||||||||||||
| AS225 | 220-240V 50Hz | |||||||||||||
| AS385 | 380-415V 50Hz | |||||||||||||
YCP5-80 Accessories
| Names of accessories | Code | The type of contacts | installation place | |||||||||||
| Instantaneous auxiliary contacts |
A01 | 1NO+1NC | The right of breaker (1 PCS can be installed) |
|||||||||||
| A02 | 2NO | |||||||||||||
Write your message here and send it to us
Related Products
-
EP Universal Changeover SwitchGeneral EP is mainly used for electrical equipment cabinets or three-phase asynchronous motor load start shifting and steering, used as the main and auxiliary circuits conversion, can fully replace other switches. Type designation Technical data Model specification EP-20 EP-25 EP-32 ... -
TZ Micro SwitchCharacteristics / Application Contact Form External Appearance Size TZ-6000 TZ-6001 TZ-6101 TZ-6103 TZ-6002 TZ-6102 ... -
LY2, LY3, LY4 General-purpose RelayContact Rating 1Z 2Z,3Z,4Z Contact Resistance 50mΩ(1A6VDC ) 50mΩ(1A6VDC ) Contact Capacity 10A250VAC/28VDC 10A 250VAC/28VDC Insulation Resistance 500MΩ Dielectric Strength BCC 1000VAC 1min BOC 1500VAC 1min CCC 1500VAC 1min Operating Time 25ms/25ms Terminal Type PCD and Socket Coil rati... -
LE1 Magnetic StarterOperation and installation condition 1. Ambient air temperature:-5℃~+40℃， average temperature of 24 hours must below +35℃ 2. Altitude:≤2000m 3. Relative humidity: The maximum temperature of 40 degrees,the air relative humidity not exceed 50%,at a lower temperature can allow for a higher relative humidity.The humidest month’s average lowest temperature must be below 25℃, the max relative humidity of that month should not exceed 90%.If humidity changes as a result of... -
YCC6 AC ContactorGeneral YCC6 series AC Contactor with novel appearance and compact structure is suitable for using starting & controlling the AC motor frequently, switching on and off the circuit at a long dis- tance. It is used in combination with thermal relay to compose a magnetic motor starter. Standard: lEC 60947-1, IEC 60947-4-1. Technical data • Rated operation current(le): 9-95A • Rated operation voltage(Ue):220V~690V • Rated insulation... -
TP8A16 Time Relay
Official shop
Follow us
-
-
-
Address：CNC High-Tech Hutou Industrial Zone, Liushi Town, Yueqing, Wenzhou Ctity, China
Copyright © 2024 CNC ELECTRIC GROUP CO.,LTD. All Rights Reserved.
Hot Products - Sitemap
6a Elcb, 3p Ac Mcb, Mccb Microprocessor Based, 250amp Mccb Circuit Breaker, Mpcb, 3 Phase Starter,
Hot Products - Sitemap
6a Elcb, 3p Ac Mcb, Mccb Microprocessor Based, 250amp Mccb Circuit Breaker, Mpcb, 3 Phase Starter,