Projects
Solutions
Services
News
About Us
SVC Single-phase Automatic Voltage Stabilizer
-
Product Overview
-
Product Details
-
Data Download
-
Related Products
SVC Single-phase Automatic Voltage Stabilizer
Picture
SVC Single-phase Automatic Voltage Stabilizer
Introduction
SVC series full-automatical voltage regulator consist of contact autotransformer, servomotor, automatic control circuit etc. When grid voltage or load is changed,
automatically sampling control circuit sends a signal to drive servomotor, adjust the position of the self coupling voltage regulator for carbon brush, make the output voltage rating reach the stable state.
This product has the waveform distortionless, reliable performance. long-term operation and other characteristics, such as time delay, over voltage, undervoltage protection. It can be widely used in electricity which need stable voltage, it is an ideal voltage stabilized supply to ensure the normal operation of electrical equipment.
Contact Us
Product Details
General
SVC series full-automatical voltage regulator consist of contact autotransformer, servomotor, automatic control circuit etc. When grid voltage or load is changed, automatic sampling control circuit sends a signal to the drive servomotor, to adjust the position of the self coupling voltage regulator for carbon brush, so that the output voltage rating can reach the stable state.
This product has the waveform distortionless, reliable performance, long-term operation and other characteristics, such as time delay, over voltage, undervoltage protection. It can be widely used in electricity where stable voltage is needed, it is an ideal voltage stabilized supply to ensure the normal operation of electrical equipment.
Technical data
| Input voltage | 150V-250V |
| Output voltage | 220V |
| Output deviance | ±3% |
| Frequency | 50Hz~60Hz |
| Efficiency | ≥90% |
| Response time | ≤1S |
| Ambient temperature | -10℃~+40℃ |
| Insulation resistance | ≥5MΩ |
| Waveform distortion | Non-lack fidelity wareform |
| Protection | Overvoltage, Overcurrent |
Ordering information
| Model | Weight(kg) | Outline(cm) | QTY |
| SVC-500VA | 4 | 19 × 16 × 14 | 4 |
| SVC-1000VA | 5.5 | 21 × 19 × 17 | 4 |
| SVC-1500VA | 5.8 | 21 × 19 × 17 | 4 |
| SVC-2000VA | 10 | 29 ×24 ×20 | 2 |
| SVC-3000VA | 12 | 29 ×24 ×25 | 2 |
| SVC-5000VA | 15 | 36 ×22 ×29 | 2 |
| SVC-7000VA | 16.5 | 36 ×22 ×29 | 2 |
| SVC-10000VA | 27 | 42 ×24 ×36 | 1 |
| SVC-15000VA | 64 | 42 ×38 ×76 | 1 |
| SVC-20000VA | 70 | 42 ×38 ×76 | 1 |
| SVC-30000VA | 95 | 45 ×43 ×87 | 1 |
| SVC-5000VA(vertical) | 17 | 32 ×28 ×46 | 1 |
| SVC-10000VA(vertical) | 36 | 36 ×28 ×51 | 1 |
Write your message here and send it to us
Related Products
-
YC6VA Voltage Protection RelayAppearance and Dimension of Keypad Description Voltage and current display relay is a microprocessor-based voltage monitoring device for single-phase AC networks to protect electrical equipment from surge voltage.The device analyzes the main voltage and displays its current value on a digital indicator. Load is switched by electromagnetic relay.The user can set the current voltage value and delay time through the butto... -
Insulating Distributing SlotInsulating Distributing Slot Material: PVC (grey), good insulation and heat-resisting up to 85°C. Structure: Made up of duct bottom and lid, with two out-holes designed at the bottom. Type H ×W (mm) Contained wire -2.02 Length 2015 20 × 15 5-10 PCS 2m 2525 25 ×25 10-20 PCS 2m 3015 30 × 15 5-15 PCS 2m 3020 30 ×20 10-20 PCS 2m 3025 30 ×25 15-25 PCS 2m 3030 30 ×30 20-40 PCS 2m 30... -
XMT□- 9 Temperature ControllerGeneral 9□ □ □ series(REX series) intelligent digital display temperature controller adopts the latest plane touch operation and microcomputer control technique. Based on the principle of simpleness, convenience, stability and reliability, this series instruments have great adaptability to the market, and it complies with the international standard and has various installation size.The series intelligent digital display temperature... -
CD 2-250H -
CJX2-Z DC ContactorsCJX2-09~32Z Application CJX2-Z series DC operated contactor is suitable for use in the circuits up to rated voltage 660V DC 50Hz or 60Hz, and in rated current 9-95A in DC-3/380V load circuits. For remote controlling circuit making, breaking and frequent starting DC motors. It can also combine with the auxiliary contact g... -
MS-15W, S-15W Power SupplyMS-15W MS-15W Single output: power 15W Input voltage: 85~264VAC 120~370VDC Technical data Model Specification MS-15-5 MS-15-12 MS-15-15 MS-15-24 DC output voltage, current 5V 0~3A 12V 0~1.3A 15V 0~1A 24V 0~0.7A Wave and noise 60mVp-p 80mVp-p 100mVp-p 100mVp-p Inlet wire stability ±0.5% ±0.5% ±0.5% ±0.5% Load stability ±0.5% ±0.5% ±0.5% ±0.5% Efficiency 68% 71% 72% ...
Official shop
Follow us
-
-
-
Address：CNC High-Tech Hutou Industrial Zone, Liushi Town, Yueqing, Wenzhou Ctity, China
Copyright © 2024 CNC ELECTRIC GROUP CO.,LTD. All Rights Reserved.
Hot Products - Sitemap
3p Ac Mcb, Mpcb, 6a Elcb, 3 Phase Starter, Mccb Microprocessor Based, 250amp Mccb Circuit Breaker,
Hot Products - Sitemap
3p Ac Mcb, Mpcb, 6a Elcb, 3 Phase Starter, Mccb Microprocessor Based, 250amp Mccb Circuit Breaker,