Medium and high voltage products Manufacturers | China Medium and high voltage products Factory & Suppliers - Part 3

Product Category

LZZBJ9-10 Current Transformer

This current transformer isof a whole sealing casting insulation pllar type,usedfor measurement of current and electricenergy aswell as relay protection in theAC circuit of rated frequency 50Hzand rated voltage 10kV.
Standard:IEC 61869-2
LFS-10Q Current Transformer

This type of current transformer is casting resin, fully enclosed and post type product. It is used for metering electric energy and current, relay protection in the electrical system.

Standard:IEC 61869-2
GW1-24 Isolation Switch

GW1series outdoor MV isolate switch is the high voltage switch equipment of composite structure,is suitable for outdoor 12kVline net with voltageand no load,to make opening and close.With type manpoweroperate machinery,can avoid earth linewith power andcomposite flash-locks etc wrongoperate
c The operatoris no need to put another earth line.Pollution-proof typeisolate switch satisfy customerin fithy conduction area.Itcansolvethe pollution of shed when it is working.
SC(B)□ Series Dry-type Transformer

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
S□-M Series Dry-type Transformer

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
S□-MD Series Oil-Immersed Transformer.

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
S□-ML Series

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
S□-35KV Series Oil-Immersed Transformer.

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
S9-M Oil-Immersed Transformer

The S9-M series three-phase oil-immersed transformer adopts afully oil-flled,sealed corrugated oi tank.and the oil tank shell adapts tothe expansion performance of the oil withits own elasticity and meets the heat dissipation requirements.It has the characteristicsofhighefficiency and low loss,which can save a lot of power consumption and operating costs,and iswidely used in power plants,substations,industrial and mining enterprises,ports,airportsand other environmental protection places CStandard:IEC60076-1,IEC60076-2,IEC60076-3,IEC60076-5,IEC60076-10.
VYC-12 Center Solid Seal Vacuum Contact Switch-Fuse Combination

VYC Type Center-mounted Vacuum Contactor-Fuse Combination Electrical Appliance is suitable for indoor switchgear equipment with a rated voltage of 3.6-12 kV and a three-phase AC frequency of 50 Hz.

This product is designed for places that require frequent circuit breaking and closing operations. It can meet the user’s requirements for frequent operations and has advantages such as long lifespan, stable operation, and reasonable functionality.

It is suitable for center-mounted switchgear cabinets with widths of 650mm and 800mm. It is applied in various industrial and mining enterprises such as metallurgy, petrochemicals, and mining. It is used to control and protect high-voltage motors, variable frequency drives, induction furnaces, and other load switching equipment.

Standard: IEC60470:1999.
VYC MV Vacuum Contactor

VYC Type Center-mounted Vacuum Contactor-Fuse Combination Electrical Appliance is suitable for indoor switchgear equipment

with a rated voltage of 3.6-12 kV and a three-phase AC frequency of 50 Hz.
ZN63(VS1)-12S Indoor Vacuum Circuit Breaker (pole-fixed and sealed)

ZN63(VS1)-12S indoor AC MV vacuum circuit breaker is a three-phase AC 50HZ indoor switchgear with a rated voltage of 12KV.It canbe used in industrial and mining enterprises,power plantsand substations for thecontrol and protection of electical facilities and issuitable for placeswith frequent operations.
Standard:IEC 62271-100

<< < 1 2 3 4 5 6 > >> 3 / 8