ZN23-40.5 MV vacuum circuit breaker is indoor MV distribution device ofthree-phase AC 50Hz,rated voltage 40.5kV,can be matched with JYN35/GBC-35 type switchcabinet.Suitablefor control and protection in power plant,substation and power dstribution system,especially suitable for frequent operation places.The vacuum circuit breaker is handcart type,withreasonable structure,convenient maintenance,safe andreliableuse

ZN63(VS1)-12S indoor AC MV vacuum circuit breaker is a three-phase AC 50HZ indoor switchgear with a rated voltage of 12KV.It canbe used in industrial and mining enterprises,power plantsand substations for thecontrol and protection of electical facilities and issuitable for placeswith frequent operations.
Standard:IEC 62271-100

ZN63(VS1)-12indoor AC MV vacum circuit breaker is a three-phase AC 50HZ indoor switchgear with a rated voltage of 12KV It can be used in industrial and mining enterprises,power plants and substations for the control and protection of electrical failities. andis suitable for places withfrequent operations.
C Standard:IEC 62271-100

ZN63C-12 seiesindoor ACMVwacuum dicuit breaker (hereinafter refemedto as drouitbreakeris anindoor switcdhgear with three-phase AC 50Hz and rated woltage of 12K,which can be used for the control and protection of electrical facolitiesin industrial andmining enterprises,power plants and substations it s suitable for places ith fiequent ope ations.
c The drouit breaker adopts an integrated deign of the operating mechanism and the dicuit breaker body,and is used as a foved installation unit c Standard:IEC62271-100

ZN63(VS1)-12P indoor AC MV vacuum circuit breaker is a three-phase AC 50HZ indoor switchgear with a rated voltage of 12KV.It canbe used in industrial and mining enterprises,power plantsand substations for thecontrol and protection of electical facilities and issuitable for placeswith frequent operations.
Standard:IEC 62271-100

The ZN63M-12 wacuum circuit breaker adopts a permanent magnet operating mechanism,which is used to open and close various types of electric loads.It is suitable for occasions that operate frequently within the working current range andhave certain requirements for the numberof short-circuit breakingoperations.
C Standard:IEC 62271-100

ZN63(VS1)-24 series indoor AC MV vacuum circuit breaker is an indoor switchgear for three-phase AC 50Hz,rated voltage 4KV power system.The market combines years of professional production experience to develop and design a new generation of vacuum circuit breakers.
CStandard:IEC 62271-100

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln

ZW32-12 outdoor MV vacuum circuit breaker is the outdoor distribution equipment with rated voltage 12KV,three phase AC 50Hz It is used in substation and industrial and mining enterprises distribution system for protecting and controlling use.It is also used in rural power grid places with frequent operation for breaking and dlosing the load current and over load curent and short circuit current of power system.

ZW32Y-12/630-20/25 outdoor permanent magnetic MV vacuum on pillar dry circuit breaker (hereinafter referred to as circuit breaker),is the control andprotection equipment used in rated voltage 12KV,50HZ AC three phase high voltage distribution grid.Mainly used for load current,overload current and short-circuit current breaking,closing in the power lines.Applied to substation and industrial and mining enterprises in power system used for protection and control purposes c Standard:IEC 62271-100